Видео

😂 I was thinking the same thing with the handle nut....Piece of shit 😂😂😂 thanks for the video. It's helping me fix my 905, it's old but it's one of the last things from my father's company so I'm trying to keep it alive! Reminds me of the good old days when dad was still alive! Thanks again

Thank you. The video helped to get further.

What was the fault for not getting on bro?

Hi thanks for the video it helped me mend mine it's a bit different as mine has a small aluminium box plotted controller and yours had a coil of wire so I just connected the two thick ones together and bingo it works thanks thanks from England all's good :)

Macho no tienes ni idea

In case you struggle to remove the part with stator, it is possible that while rotating, it melt the plastic in the stator which makes impossible to remove the rotor as done in the video What I've done : - There are 2 screws on the stator that you can remove if you are patient enough - Also you need to remove the 2 screws that attach the rotor Once both of this are done you can remove the rotor on the piece Hopefully it will help someone, I've tried for hours to remove this part...

In case you struggle to remove the part with stator, it is possible that while rotating, it melt the plastic in the stator which makes impossible to remove the rotor as done in the video What I've done : - There are 2 screws on the stator that you can remove if you are patient enough - Also you need to remove the 2 screws that attach the rotor Once both of this are done you can remove the rotor on the piece Hopefully it will help someone, I've tried for hours to remove this part...

Great video helped me fix mine appreciate it brother

Thanks to case study.

Hi, good video. I have a 4 year old Bosch GWS 22-230 JH. It stopped working while cutting a metal pipe. how do you test the electronic circuit 1-607-233-317 in the switch to see if that is broken down?

I wish these drills were still available to buy

День добрый, кто нибудь ремонтировал контроллер? Меня интересует какой стоит транзистор? У меня выгорел транзистор, надписи сгорели.

Cho xin cái ruột cũ

what a bullshit video, no solution, just a 10 min waste of time

Thank you for this useful video. Can you please tell where you got the parts from? I would like to buy. Thanks

You had to heat it in 2 stages

Hi all. I need help. My machine did no hammer blow. I replaced the parts you are showing and now I can hammer drill again but there seems to be another issue. When I drill a hole like 8mm into a beton wall then I‘m not able to get the beton drill off the wall because the overload clutch is on and makes this typical cracking noises. Is there an issue in the hammer pipe 1617000609, exactly on the balls 1903230010 which could be worn out?

Must have done a lot of work. Worn out brushes, worn bearings, gearbox very black and dry.

Belinya di mana bos?

Legendary, just found one at a garage sale. A complete lack of maintenance during its whole existence was it's problem ( all jammed up ). Thanks for this video!

Hola donde has comprado el kit con el transistor, me puedes dar el enlace? por favor

thank you! i jammed a small bit into the anvil and it would not come out. Wasn't sure how to disassemble the hammer case.

My M18 Milwaukee Hammer drill just died. The light turns on and when I hit the button, it goes click. I use it extensively this frame blasting holes in the yard to plant things. It's worked for years. Any ideas? Let me know, please. WHO repairs these.

Hi, did you find where this part went as I have same issue. Part is cheap but not sure where to locate new one

no sound

Your solder melts instantly. Not mine. I try cleaning my solder gun and dipping the tip in flux.

Сколка масла надевать ?

Probleme voyant allumer forme cleef merci

where is the sound? no sound and you provided zero content

Kahnatig rad

My bit stack in and it broken on the lock

Give me mobail namber

Hr có chổi than ? M mới có than

Cool thanks you my friend

I wish I could see this video before i bought the replacement motor, because it doesn't fit. Where dio I get that black flange?

I counted 1 disaster. The rest were recoveries.

The way you use tools is satisfying to watch lmfao😂

Hello and thank you for the video a quick question, how much grease do you put when the machine is all cleaned Thank you very much

My bit broke off in my anvil and I couldn’t get it out. I went to the Dewalt service center and they was going to charge me $85 plus tax to replace the anvil. That was a NO GO!! I bought the anvil with new washers, springs, and ball bearing from them. Watched your video and repaired it for $15. Thanks 🙏🏿 man.

I have a dcd780 and today i was drilling some steel the i noticed the chuck control became stiff when i tried to change drill bits ! Usually it’s so easy to close and open by hand even with fingers but now it’s stiff ! What do you think?

I spayed silicone lube up shaft and gently hammered out....took seconds

Need WD-40

You forgot the sound. LL : )

Or, you put a lot of contact spray in the switch, clean it a bit a voila; ruclips.net/video/1ORawi11P_c/видео.htmlsi=_YDSmNp-EFyzlAoJ No need to (always) replace.

Thank you very much for you're demonstration, with you're help i can rebuilt my Makita correctly, because i don't remeber where the spring go, and now i know. Have a nice day 😉

thx, just neded to know how to get the motor out

I do not know what to do with yellow wire.

I have the same Makita tool and the problem is that throwing away the hammer drill...what part do you suggest me to replace?

I heard somewhere that an antenna or Wi-Fi allows your drill from Milwaukee, (at least the half inch impact driver), to be tracked anywhere in the world if you register it online. What if we wanted to remove that antenna or Wi-Fi so we had a more private tool?

Best video I have seen on repairing a DeWalt 1/4" chuck. Clearly shows the correct placement of the ball bearing and keeper spring..